Proposal for implantation of a coffee drying greenhouse with parabolic cover and adapted modular structure
Main Article Content
Abstract
Keywords
reverse engineering, design, marquee, manufacturing, parabolic, Statgraphics ingeniería inversa, diseño, marquesina, manufactura, parabólica, Statgraphics
References
[2] K. Jitjack, S. Thepa, K. Sudaprasert, and P. Namprakai, “Improvement of a rubber drying greenhouse with a parabolic cover and enhanced panels,” Energy and Buildings, vol. 124, pp. 178–193, 2016. [Online]. Available: https://doi.org/10.1016/j.enbuild.2016.04.030
[3] C. E. Oliveros-Tascón, C. A. Ramírez-Gómez, and J. R. Sanz-Uribe, “Secador solar de túnel para café pergamino,” Avances Técnicos Cenicafé, pp. 1–8, 2006. [Online]. Available: https://bit.ly/3cNt2NG
[4] M. Kumar, S. K. Sansaniwal, and P. Khatak, “Progress in solar dryers for drying various commodities,” Renewable and Sustainable Energy Reviews, vol. 55, pp. 346–360, 2016. [Online]. Available: https://doi.org/10.1016/j.rser.2015.10.158
[5] A. Ghazanfari, L. Tabil Jr., and S. Sokhansanj, “Evaluating a solar dryer for in-shell drying of split pistachio nuts,” Drying Technology, vol. 21, no. 7, pp. 1357–1368, 2003. [Online]. Available: https://doi.org/10.1081/DRT-120023183
[6] M. E.-A. Slimani, “Etude d’un séchoir solaire agricole muni d’un capteur solaire de type "pv-therm": réalisation d’un prototype et caractérisation,” Ph.D. dissertation, 2017. [Online]. Available: https://bit.ly/2LQNzVr
[7] V. Tomar, G. N. Tiwari, and B. Norton, “Solar dryers for tropical food preservation: Thermophysics of crops, systems and components,” Solar Energy, vol. 154, pp. 2–13, 2017, solar Thermal Heating and Cooling. [Online]. Available: https://doi.org/10.1016/j.solener.2017.05.066
[8] M. Al-Neama and I. Farkas, “Utilization of solar air collectors for product’s drying processes,” The Journal of Scientific and Engineering Research, vol. 5, no. 2, pp. 40–56, 2018. [Online]. Available: https://bit.ly/3eaPDUJ
[9] D. E. Ogheneruona and M. O. L. Yusuf, “Design and fabrication of a direct natural convection solar dryer for tapioca design and fabrication of a direct natural convection solar dryer for tapioca,” Leonardo Electronic Journal of Practices and Technologies, vol. 10, no. 18, pp. 95–104, 2011. [Online]. Available: https://bit.ly/3bMGqQz
[10] A. Tefera, W. Endalew, and B. Fikiru, “Evaluation and demonstration of direct solar potato dryer,” Livestock Research for Rural Development, vol. 25, no. 12, 2013. [Online]. Available: https://bit.ly/2LN8Lf4
[11] R. Patil and R. Gawande, “A review on solar tunnel greenhouse drying system,” Renewable and Sustainable Energy Reviews, vol. 56, pp. 196–214, 2016. [Online]. Available: https://doi.org/10.1016/j.rser.2015.11.057
[12] INEN, NTE INEN 1757 Frutas frescas, limón, requisitos. Norma Técnica Ecuatoriana, 2016. [Online]. Available: https://bit.ly/2XtNXPt
[13] MIDUVI, NEC-11. Energías Renovables. Norma Ecuatoriana de la Construccón, 2011. [Online]. Available: https://bit.ly/2XdaEqY
[14] Dassault Systemes. (2019) SOLIDWORKS. [Online]. Available: https://bit.ly/2XdakZf
[15] Rendering. (2019) Rendering, rendering 3d, rendering animation. [Online]. Available: https://bit.ly/3e2eUQK
[16] R. García, Curso básico de STATGRAPHICS Version 5.0, 2005. [Online]. Available: https://bit.ly/2ZjCB2Z
[17] J. A. D. W. A. Beckman, Solar Thermal Power Systems. John Wiley & Sons, Ltd, 2013, ch. 17, pp. 621–634. [Online]. Available: https://doi.org/10.1002/9781118671603
[18] G. T. Heineman and W. T. Councill, Componentbased Software Engineering: Putting the Pieces Together. ACM Press series, 2001. [Online]. Available: https://bit.ly/2zjQfs2
[19] L. Iribarne, J. M. Troya, and A. Vallecillo, “A trading service for cots components,” The Computer Journal, vol. 47, no. 3, pp. 342–357, 2004. [Online]. Available: https://doi.org/10.1093/comjnl/47.3.342
[20] L. Iribarne, J. A. Torres, and A. P. na, “Using computer modeling techniques to design tunnel greenhouse structures,” Computers in Industry, vol. 58, no. 5, pp. 403–415, 2007. [Online]. Available: https://doi.org/10.1016/j.compind.2006.09.001
[21] S. H. Kong, S. D. Noh, Y.-G. Han, G. Kim, and K. I. Lee, “Internet-based collaboration system: Press-die design process for automobile manufacturer,” The International Journal of Advanced Manufacturing Technology, vol. 20, no. 9, pp. 701–708, Oct. 2002. [Online]. Available: https://doi.org/10.1007/s001700200209
[22] K. L. Mills and H. Gomaa, “A knowledgebased method for inferring semantic concepts from visual models of system behavior,” ACM Trans. Softw. Eng. Methodol., vol. 9, no. 3, pp. 306–337, Jul. 2000. [Online]. Available: https://doi.org/10.1145/352591.352594
[23] M. Wirsing, A. Knapp, and S. Balsamo, Radical Innovations of Software and Systems Engineering in the Future. 9th International Workshop, RISSEF 2002, Venice, Italy, October 7-11, 2002, Revised Papers. Springer-Verlag Berlin Heidelberg, 2004. [Online]. Available: https://doi.org/10.1007/b96009
[24] M. Ghazel, A. Toguyéni, and M. Bigand, “An uml approach for the metamodelling of automated production systems for monitoring purpose,” Computers in Industry, vol. 55, no. 3, pp. 283–299, 2004, object-oriented modelling in design and production. [Online]. Available: https://doi.org/10.1016/j.compind.2004.08.005
[25] Cenicafé, “Secado del café pergamino,” Cenicafé, 2019. [Online]. Available: https://bit.ly/2zZwRk0