Rapid prototyping in the manufacture of 3D printed molds for plastic blowing
Main Article Content
Abstract
Keywords
molde para soplado, impresión 3D, creación rápida de prototipos, botellas de plástico Mold for blowing, Rapid prototyping, 3D printing, Plastic bottles
References
[2] R. Martell, Esperiencias en la empresa Roma Chemical, 2019.
[3] G. Unruh, “Circular economy, 3d printing, and the biosphere rules,” California Management Review, vol. 60, no. 3, pp. 95–111, 2018. [Online]. Available: https://doi.org/10.1177/0008125618759684
[4] T. Z. Sudbury, R. Springfield, V. Kunc, and C. Duty, “An assessment of additive manufactured molds for hand-laid fiber reinforced composites,” The International Journal of Advanced Manufacturing Technology, vol. 90, no. 5, pp. 1659–1664, May 2017. [Online]. Available: https://doi.org/10.1007/s00170-016-9464-9
[5] A. Baranov, A. I. Pronin, V. A. Dikov, A. V. Zakharov, and M. G. Lagutkin, “Casting molds for the routine production of plastic hydrocyclone components,” Chemical and Petroleum Engineering, vol. 45, no. 7, p. 513, Oct. 2009. [Online]. Available: https://doi.org/10.1007/s10556-009-9219-7
[6] C.-C. Kuo, W.-H. Chen, X.-Z. Liu, Y.-L. Liao, W.-J. Chen, B.-Y. Huang, and R.-L. Tsai, “Development of a low-cost wax injection mold with high cooling efficiency,” The International Journal of Advanced Manufacturing Technology, vol. 93, no. 5, pp. 2081–2088, Nov. 2017. [Online]. Available: https://doi.org/10.1007/s00170-017-0596-3
[7] Sander Kunststofftechnik. (2017) Development and production of prototypes and small series made of plastic. [Online]. Available: https://bit.ly/3dAip0C
[8] AICON 3D SYSTEMS GMBH, OPTOCAT 2015R2 – New version, new functions, 2015. [Online]. Available: https://bit.ly/3cvv8l7
[9] Stratasys, Manual del usuario uPrint SE and uPrint SE plus personal 3D printers, 2011. [Online]. Available: https://bit.ly/2T1H2eQ
[10] S. Belcher, Practical Extrusion Blow Molding, 1999. [Online]. Available: https://bit.ly/2WuzVha [11] I. Suchy, Handbook of die design. McGraw- Hill, 2005. [Online]. Available: https://bit.ly/ 35YaWGb
[12] L. Espinoza and C. Nuila, I18RE-MD001 Mediciones dimensionales a botellas de muestra. Laboratorio de Metrología ndustrial, Soyapango, 2018.
[13] J. Hernández, Nota técnica: Principio de funcionamiento del sistema de inyección y análisis para la comprensión de la influencia del defecto rebaba de preformas PET. Universidad de Carabobo, Valencia, Venezuela, 2013.
[14] 3D Printers. (2018) Impresoras 3d para plástico. [Online]. Available: https://bit.ly/2Z2nISf