Identificación y control CPG de un motor de CA con DSPACE

Article Sidebar

PDF
Published: Jul 4, 2016
DOI: https://doi.org/10.17163/ings.n15.2016.07
Keywords:
AC motor, dSPACE, GPC control identification, predictive control

Main Article Content

Juan Ulises Moreano Peña

Abstract

In the paper presented below, the focus is directed to the automation and control of an AC motor, as well as obtaining its mathematical model (in the form of transfer function) using dSPACE platform, which facilitates the realization of real time testing that is necessary to identify the process here presented. Once the model is obtained, we proceed to develop the design of a controller based on the Generalized Predictive Control (GPC) methodology. Finally, the controller designed was applied to the system coupled to a simulated load by an electromagnetic break. As it is known, the usage of these motors is widespread in the industry, this work is aimed to controlling the speed, its response to changes in set point and its response to the presence of disturbances.

Article Details

Issue
No. 15 (2016): January / June
Section
Scientific Paper

 

The Universidad Politécnica Salesiana of Ecuador preserves the copyrights of the published works and will favor the reuse of the works. The works are published in the electronic edition of the journal under a Creative Commons Attribution/Noncommercial-No Derivative Works 4.0 Ecuador license: they can be copied, used, disseminated, transmitted and publicly displayed.

The undersigned author partially transfers the copyrights of this work to the Universidad Politécnica Salesiana of Ecuador for printed editions.

It is also stated that they have respected the ethical principles of research and are free from any conflict of interest. The author(s) certify that this work has not been published, nor is it under consideration for publication in any other journal or editorial work.

The author (s) are responsible for their content and have contributed to the conception, design and completion of the work, analysis and interpretation of data, and to have participated in the writing of the text and its revisions, as well as in the approval of the version which is finally referred to as an attachment.

References

[1] J. M. Murphy and F. G. Turnbull, Power Electronic Control of AC Motors, Ed. Oxford: Pergamon Press, 1988.
[2] T. Wildi, “Three-Phase Induction Motors”, in Electrical Machines, Drives, and Power Systems, 5th ed., Ed. New Jersey: Prentice Hall, 2002, pp. 263-298.
[3] P.C. Krause, O. Wasynczuk, S.D. Sudhoff, “Induction Motor Drives”, in Analysis of Electric Machinery and Drive Systems, 2nd ed., Ed. New York: Wiley Interscience, 2002, pp. 525-556.
[4] A. Trzynadlowski, “Construction and Steady-State Operaton of Induction Motors”, in Control of Induction Motors, Ed. San Diego: Academic Press, 2001, pp. 15-42.
[5] Z. A. Ghani, M. A. Hannan and A. Mohamed, “Simulation model of three-phase inverter using dSPACE platform for PV application,” International Review on Modelling and Simulation (I.RE.MO.S.), vol. 5, pp. 137-145, 2012.
[6] P. M. Menghal and A. J. Laxmi, “Real time control of electrical machine and drives: A review,” International Journal of Advances in Engineering & Technology vol. 1, pp. 112-126, 2011.
[7] S. Sztendel, C. Pislaru, A. P. Longstaff, S. Fletcher and A. Myers, “Five-Axis Machine Tool Condition Monitoring Using dSPACE Real-Time System”, 25th COMADEM, Huddersfield, United Kingdom, 2012.
[8] T. S. Giam, K. K. Tan and S. Huang, “Precision coordinated control of multi-axis gantry stages”, ISA Transactions, vol. 46, pp. 399-409.
[9] T. Gallah, R. Trabelsi, R. Abdelati, A. Ben Ali and A. Khedher, “dSPACE DS-1104 implementation of Field Oriented Control for induction motor”, 10th STA , Hammamet, Tunisia, 2009.
[10] J. Jona, Y. Chintu, K. Sri Gowri and G. Kumaraswamy, “Implementation of dSPACE controlled DPWM based induction motor drive”, Proc. IJRET, vol. 2, pp. 448-453, 2013.
[11] J. Versele, O. Deblecker and J. Lobry, “Implementation of Induction Motor Drive Control Schemes in MATLAB/Simulink/dSPACE Envionment for Educational Purpose” [online] Available: http://www.intechopen.com/books/matlab-for-engineers-applications-in-control-electrical-engineering-it-and-robotics/implementation-of-induction-motor-drive-control-schemes-in-matlab-simulink-dspace-environment-for-ed.
[12] M. A. Hannan, Z. A. Ghani and A. Mohamed, “An enhanced inverter controller for PV applications using the dSPACE platform”, International Journal of Photoenergy, vol. 2010, 10 pages, 2010.
[13] M. Jemli, H. B. Azza and M. Gossa, “Real-time implementation of IRFOC for single-phase induction motor drive using dSpace DS 1104 control board,” Simulation Modelling Practice and Theory, vol 17, pp. 1071-1080.
[14] A. Soria, R. Garrido, I. Vásquez and R. Vásquez. “Architecture for rapid prototyping of visual controllers. Robot Auton Syst” [online]. Robotics and Autonomous Systems, vol. 54, pp. 486-495. Available: http://www.sciencedirect.com/science/article/pii/S0921889006000121.
[15] dSPACE Catalog 2014, dSPACE GmbH., Paderborn, Germany, 2014.
[16] ControlDesk Experiment Guide, dSPACE GmbH, Paderborn, Germany, 2008.
[17] D. W. Clarke, C. Mohtadi and P. S. Tuffs, “Generalized predictive control – Part I. The basic algorithm,” Automatica, vol. 23, pp. 137–148, 1987.