Analysis of the combustion of methane and an equimolar mixture methane-syngas in a surface-stabilized combustion burner: pollutant efficiency and emissions
Main Article Content
Abstract
Keywords
Surface-stabilized combustion burner, methane, High hydrogen content syngas. Combustión estabilizada en la superficie, metano, Syngas de alto contenido de hidrógeno
References
Issue.
L. D. Thi, Y. Zhang, and Z. Huang, “Shock tube study on ignition delay of multi-component syngas mixtures effect of equivalence ratio,” International Journal of Hydrogen Energy, vol. 39, no. 11, pp. 6034 – 6043, 2014.
A. Colorado, B. Herrera, and A. Amell, “Performance of a flameless combustion furnace using biogas and natural gas,” Bioresource Technology, vol. 101, no. 7, pp. 2443 – 2449, 2010.
Y. Najjar, “Hydrogen safety: The road toward green technology,” International Journal of Hydrogen Energy, vol. 38, no. 25, pp. 10 716 – 10 728, 2013.
K. H. Casleton, R. W. Breault, and G. A. Richards, “System issues and tradeoffs associated with syngas production and combustion,” Combustion Science and Technology, vol. 180, no. 6, pp. 1013–1052, 2008.
Y. He, Z. Wang, L. Yang, R. Whiddon, H. Zhongs, J. Zhou, and K. Cen, “Investigation of laminar flame speeds of typical syngas using laser based bunsen method and kinetic simulation,” Fuel, vol. 95, no. 0, pp. 206 – 213, 2012.
M. Chaos and F. L. Dryer, “Syngas combustion kinetics and applications,” Combustion Science and Technology, vol. 180, no. 6, pp. 1053–1096, 2008.
D. Giles, S. Som, and S. Aggarwal, “{NOx} emission characteristics of counterflow syngas diffusion flames with airstream dilution,” Fuel, vol. 85, no. 12–13, pp. 1729 – 1742, 2006.
R. W. Francisco, F. Rua, M. Costa, R. C. Catapan, and A. Oliveira, “On the combustion of hydrogen-rich gaseous fuels with low calorific value in a porous burner,” Energy Fuels, vol. 22, no. 2, pp. 880–887, 2010.
M. Mujeebu, M. Abdullah, M. Abu-Bakar, A. Mohamad, R. Muhad, and M. Abdullah, “Combustion in porous media and its applications a comprehensive survey,” Journal of Environmental Management, vol. 90, no. 8, pp. 2287 – 2312, 2009.
D. Dunn-Rankin, R. K. Cheng, and H. Levinsky, “Lean premixed burners,” Lean Combust, pp. 161–V, 2008.
B. Yu, S.-M. Kum, C.-E. Lee, and S. Lee, “An experimental study of heat transfer and pollutant emission characteristics at varying distances between the burner and the heat exchanger in a compact combustion system,” Energy, vol. 42, no. 1, pp. 350 – 357, 2012.
——, “Combustion characteristics and thermal efficiency for premixed porous-media types of burners,” Energy, vol. 53, no. 0, pp. 343 – 350, 2013.
C. Keramiotis, B. Stelzner, D. Trimis, and M. Founti, “Porous burners for low emission combustion: An experimental investigation,” Energy, vol. 45, no. 1, pp. 213 – 219, 2012, the 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy, {ECOS} 2011.
M. Mujeebu, M. Abdullah, and A. Mohamad, “Development of energy efficient porous medium burners on surface and submerged combustion modes,” Energy, vol. 36, no. 8, pp. 5132 – 5139, 2011, {PRES} 2010.
I. G. Union. (2011) Petroleum B. guidebook to gas interchangeability and gas quality.
H. Burbano, J. Pareja, and A. Amell, “Laminar burning velocities and flame stability analysis of syngas mixtures at sub-atmospheric pressures,” International Journal of Hydrogen Energy, vol. 36, no. 4, pp. 3243 – 3252, 2011.
——, “Laminar burning velocities and flame stability analysis of H2/CO/air mixtures with dilution of N2 and CO2,” International Journal of Hydrogen Energy, vol. 36, no. 4, pp. 3232 – 3242, 2011.
S. Turns, An introduction to combustion: concepts and applications, ser. McGraw-Hill series in mechanical engineering. McGraw-Hill, 2000.
P. Bouma, L. Somers, L. de Goey, and J. Nieuwenhuizen, “Methane-air combustion on ceramic foam surface burners,” Technische Universiteit Eindhoven, pp. 153–166, 1997.